mig and flux core tips and techniques, equipment, filler metal
Successful Repair
Post Reply
Mark Proulx
  • Posts:
  • Joined:
    Thu Oct 17, 2019 6:23 pm
  • Location:
    Bellingham, Washington

I needed to repair a bent clevis ear on an agricultural implement. The job required butt welding 3/8” plate in a 3G position. I owe Jody big time for providing tutorials that allowed me to successfully complete the repair. It isn’t the most beautiful job, but as my first repair of anything, I’m pleased with it. The photos are in reverse order from the way they should be. Oops.
Attachments
A shot of paint and we are back in business.
A shot of paint and we are back in business.
ClevisComplete.png (1.42 MiB) Viewed 4646 times
Here’s the completed weld after a root pass, fill pass, and cover pass.
Here’s the completed weld after a root pass, fill pass, and cover pass.
WeldComplete.png (1.45 MiB) Viewed 4646 times
I fabricated a new ear and positioned it.
I fabricated a new ear and positioned it.
WeldSetup.png (1.31 MiB) Viewed 4646 times
I cut off the damaged portion and beveled the remaining piece.
I cut off the damaged portion and beveled the remaining piece.
EarCutOff.png (1.36 MiB) Viewed 4646 times
This was the damaged clevis ear.
This was the damaged clevis ear.
DamagedClevis01.png (1.38 MiB) Viewed 4646 times
Top
Post Reply

Return to “Mig and Flux Core - gas metal arc welding & flux cored arc welding”