Can anyone point me to a resource for pulse MIG settings for a machine without a synergic feature? I'm using an Everlast 275P but all the pulse settings are manual. I have to individually set wire speed, voltage, base voltage, frequency, and on-time. No setting or readout for amperage. I'd really like to be able to do pulse spray but that's a lot of variables to get dialed in.
Do I have a hope of finding any basic settings without spending 40 hours experimenting?....Or do I pull the rip cord and trade off the machine with a synergic feature?
mig and flux core tips and techniques, equipment, filler metal
Spray MIG requires both the correct gas mixture and voltage. Pulse settings are heavily dependent on material thickness and wire diameter. It would be very helpful if you provided some basic information so that others can offer input.
I have 90/10 gas and am using .035 ER70S6 wire. Beyond that I'm looking for some basic settings for various thicknesses of steel from 1/8 to 1/2". I've searched online without much success because most examples are using synergic machines. They usually only have a couple of adjustments, typically for amperage and a trim setting for voltage (arc length). All other settings being internal to the control. Everlast doesn't seem to publish any chart for settings so I'm kind of out in the weeds on this.
Return to “Mig and Flux Core - gas metal arc welding & flux cored arc welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities