I'm new to TIG and I have a Multimatic 220 machine. I find the torch cord that came with the machine to be very stiff. Stiff to the point that the torch has negative or positive torque in one direction depending on how the cord sits(if that makes sense). I assume that in order to upgrade to an aftermarket cord and torch I will need to buy a 25mm dinse adaptor. I'm also assuming that aftermarket cords such as those from CK worldwide are much more flexible. All newbie questions so thanks in advance.
Any suggestions for aftermarket cords/torches?
You hit it on the head: a 25’ Superflex cable set from CK works great. I have the same setup on both my MultiMatic and my Dynasty. You can order the cables through Weldmonger.com and get a great deal and support Jody too.
25mm Dinse is the correct call as well.
25mm Dinse is the correct call as well.
Man I just bought a miller diversion 180 Tig machine to learn and I have the same issue. The gas line is cranked hard to the left so I have to hold my torch with it under more pressure then feels comfortable. I had no idea that other lines could create a softer feel and help to make my torch feel like I can manage the angle without it pushing against me. Also I also buy all my stuff from weldmonger too. I would be super interested to hear about the products you chose and how the behave for you. Good luck.
A quick tip: before you attach your torch, straighten out the hose completely. Make sure it’s laying “flat and straight” then screw your torch in. If the hose has a twist in it already before you screw the torch in, you can experience a torch that resists your grip. It’s from the threads being clocked against a twisted hose.
Hope that makes sense-
Hope that makes sense-