[fill&cap]

hi guys
iv seen a few post on stick pipe so thought id post some pics of some pipe welds i did a few years ago.some may have seen these before on other forums that im a member off.
5G 12" pipe to elbow ,tig root 2.4mm er70s6 4mm gap feather edge 130 amp,
hot pas 2.5mm 7018 90-100 amp
fill/cap 3.2 (1/8)125-130 amp.

12" pn16 flange rolled (welded at 3 oclock position)first pass ,3.2mm 7018 dragged at around 120 amp,second pass 3.2mm 7018 blocked out at around 130 amp.

[fill&cap]

continued

[fill&cap]

continued

[fill&cap]

coontinued

[weldin mike 27]

Hey,

Is very very nice. Great Success .

Mick

[vtwin86]

Your welds look great but the way your tie ins look is how mine look and my tests are failing because of my tie ins! How can i make the tie in smoother!?

[Alexa]

Fill&Cap.

Appreciated the photos, but even more, the way you wrote out the main variables of your procedure/technique, in few words but precise.

Tanks.
Alexa