General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Post Reply
Mrkil
  • Posts:
  • Joined:
    Wed Jan 30, 2013 10:04 pm
  • Location:
    Hamilton, Ontario, Canada

So I gets a call at 2pm today asking if I can come in for an interview at 3pm.
I get spiffied up and head out the door. They give me a quick interview and take me down to the floor. He shows me around and asks me what equipment I'm familiar with.

He then sends over the shop foerman. He hands me a bunch of scrap all different shapes and gauges some square tube and say weld it all together.

He comes back in a few minutes, looks it over and hmmms and haws and asks me if I can start tomorrow.

I said hell yes.

This place is kind of what I was looking for. 15 minutes from my house. 7-3:30 m-f
They also send guys across North America doing installations.

http://www.rangeviewfab.com/about_us.php

I'm pretty happy since I just graduated from welding school on the 6th.
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Hey, Congratulations!

It's hard to beat that! Close to the house, and less than a month out of school. I hope the money and bennies suit you.

It's rare, but sometimes the first job is the perfect fit.

Just remember, even if the job sucks and you hate it, learn everything you can from it!

Steve S
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

Congratulations on getting the new job.
I didn't realize that you were Canadian.
My brother used to live in Hamilton, (now in Brampton).

BTW - if you ever get over to Burlington,
stop in at Everlast and try out the welders.


I live in the Calgary, Alberta area but work for the airlines.
When I buy my equipment, I hitch hike on the airlines
and test out the equipment first hand before buying anything.
Mrkil wrote:So I gets a call at 2pm today asking if I can come in for an interview at 3pm.
I get spiffied up and head out the door. They give me a quick interview and take me down to the floor. He shows me around and asks me what equipment I'm familiar with.

He then sends over the shop foerman. He hands me a bunch of scrap all different shapes and gauges some square tube and say weld it all together.

He comes back in a few minutes, looks it over and hmmms and haws and asks me if I can start tomorrow.

I said hell yes.

This place is kind of what I was looking for. 15 minutes from my house. 7-3:30 m-f
They also send guys across North America doing installations.

http://www.rangeviewfab.com/about_us.php

I'm pretty happy since I just graduated from welding school on the 6th.
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

Congratulations. Best to keep the skills up any way you can just out of school. That's a good sign that you got hired relatively quickly.
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Alexa
  • Posts:
  • Joined:
    Mon Dec 31, 2012 10:07 am

Mrkil.

I bet you will never find that qualification test sculpure in any code book.
May want to take a photo to show your kids years from now.

Bye the way ... what process(es) did you use on the test?

Alexa
Mrkil
  • Posts:
  • Joined:
    Wed Jan 30, 2013 10:04 pm
  • Location:
    Hamilton, Ontario, Canada

Thanks everybody
It does feel pretty good happening so quick. I didn't even ask what the pay rate was. I told him I would like around 15.
As I see it anything is better than nothing and it's good experience that can go on my resume if nothing else.

All of their stuff is hard wire with 75-25.
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Hey, $15 is a good starting point. My first real welding job paid just over minimum wage, but was the most fun I've ever had, and I learned a lot!

Just don't stop there. The job market is a ladder, not a bed.

I'm 44 years old, and have worked at welding in probably 25 different jobs. I've learned everything I can from each job, and moved on. I'm currently making less than half what I could if I were working on the road, but I've finally found my niche. I really enjoy what I do, have good benefits, and sleep in my own bed every night.

You will find what fits for your life, if you explore, learn, and look.

Steve S
Mrkil
  • Posts:
  • Joined:
    Wed Jan 30, 2013 10:04 pm
  • Location:
    Hamilton, Ontario, Canada

Funny you say not to stop there

I got a message from my old instructor that wants to take me to a company he refers the best students to.
I have a welding test there tomorrow.
It is all tig in an air conditioned environment and starts at $22

He says that my tig right now will get me hired as a junior there.
I can't wait
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

$22 and climate-control?

Go for it!
Ultralow787
  • Posts:
  • Joined:
    Fri Apr 29, 2011 11:30 pm
  • Location:
    Ontario, Canada

Way to go! $22 sounds a lot better and sounds like a nice working environment as well. Always keep your options open.
Congratulations!
Perfection is impossible, but if you strive for perfection, excellence is obtainable!

1983 Canox "Sparkler" 225 AC Stick Welder
Hobart 210 MVP MIG Welder
Harris "Spitfire" Oxy-Acetylene Set
Alexa
  • Posts:
  • Joined:
    Mon Dec 31, 2012 10:07 am

Mrkil.

How long would the two jobs run?
If they're short ... perhaps you can do both.

Alexa
Post Reply