delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
How old would any one guess this to be? It's up for auction in Utah. There's no brand name on it as far as I know. The only description says it's an arc welder.
- Attachments
-
- 81QSCI13282010.jpg (21.08 KiB) Viewed 665 times
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
It looks very similar to the old Lincwelder.
http://www.lincolnelectric.com/assets/s ... /im132.pdf
http://www.lincolnelectric.com/assets/s ... /im132.pdf
- Attachments
-
- torpedo welder.JPG (72.2 KiB) Viewed 659 times
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
it's a 600amp sa bullet type ac/dc generator made by lincoln. the instruction manual for this machine is # 1m-103-a. it had self indicating continuous controls and was popular in shipyards in the 1950's. there's still some in the larger shops today. i have used both the bullet and the linc-welder in the past and found the dual controls very hard to adjust.
I've also seen that bullet in my welding travels but can't remember for the life of me where. It may have been when I was shopping for a used machine for myself some years back. I don't feel so bad about my A/BP now 
I have owned my machine for 17 years by now and it still cranks out sweet welds without any mystery from one day to the next.
I have owned my machine for 17 years by now and it still cranks out sweet welds without any mystery from one day to the next.
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Honorary member of the Fraternity of Faded Tee Shirts.
