[ajlskater1]

So its been a long time since I have posted been busy working down in Argentina most of the summer piping a cheese plant. But anyway I was wondering what large tig cup you guys use for a water cooled 20 and.the website where to find it. I just want to give a shout out and thanks to.Jody for coming up with the tig finger. I bought 1 five years ago and just finally wore it out and bought another, wish gloves lasted that long.

[Fat Bob]

Give these a look. http://www.riverweldstore.com/tig-weldi ... p7509.html

[zank]

If you are looking for a larger cup, such as a 12, you will need a 45V116S (1/16") or 45V64S (3/32") with the long collets 13N22L and13N23L, respectively. You will also need a larger heat shield. I use CK consumables, so the corrresponding CK part numbers are
2GL116LD 1/16" gas lens
2GL332LD 3/32" gas lens
2C116LD 1/16" collet
2C332LD 3/32" collet
2GHSLD heat shield
3AG12LD #12 cup

USA Weld carries them.