What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
this is a small job i was doing yesterday. these are hand cuff rings that are going to be welded to the benches of steel picnic like tables in one of the housing areas. these are simply 1 inch square tubing welded into a rectangle on a 2" x 3/8th inch baseplate welded with 7018 rods. i used 3/32 electrodes to reduce warpage. the 2 open ends are capped with a 1 inch square of 1/4" to prevent the hiding of contraband or weapons.
- Attachments
-
- securedownload (3).jpg (53.62 KiB) Viewed 2413 times
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
jd- no bidding to be done. i'm simply a small cog in a very big machine.JDIGGS82 wrote:Nice what'd you bid something like that out at?
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
So... A prisoner of the system, in your own way?jwmacawful wrote:jd- no bidding to be done. i'm simply a small cog in a very big machine.JDIGGS82 wrote:Nice what'd you bid something like that out at?
As long as the checks cash, and they let you OUT the gate... it's all good!
Steve S
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
unless you are a hermit living in a cave someplace, eating gophers and drinking rainwater we are all prisoners of the system in some way.Otto Nobedder wrote:So... A prisoner of the system, in your own way?jwmacawful wrote:jd- no bidding to be done. i'm simply a small cog in a very big machine.JDIGGS82 wrote:Nice what'd you bid something like that out at?
As long as the checks cash, and they let you OUT the gate... it's all good!
Steve S
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Amen!
I found irony in your particular situation. We all work for "the man", but most of us don't pass razor-wire gates to get there.
Steve S
I found irony in your particular situation. We all work for "the man", but most of us don't pass razor-wire gates to get there.
Steve S
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
another bit of irony for you steven~ how about the metaphorical razor wire of having to pay taxes to subsidize non-working residents??Otto Nobedder wrote:Amen!
I found irony in your particular situation. We all work for "the man", but most of us don't pass razor-wire gates to get there.
Steve S
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
This will surely confuse you, but I'm proud to pay my taxes. And how is it you now refer to me as "Steven." Who gave you that permission? Only my mother calls me that, and only when she's pissed.jwmacawful wrote:another bit of irony for you steven~ how about the metaphorical razor wire of having to pay taxes to subsidize non-working residents??Otto Nobedder wrote:Amen!
I found irony in your particular situation. We all work for "the man", but most of us don't pass razor-wire gates to get there.
Steve S
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
jwmacawful
- jwmacawful
-
Heavy Hitter
-
Posts:
-
Joined:Fri Aug 13, 2010 1:23 pm
-
Location:the city that never sleeps
then that's the both of us. lmaox2!!!Otto Nobedder wrote:LMAO!
Literally!
I needed a smile.
Stefan...
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I am surprised at how much work you have to do. At the prison I work at the inmates do the welding and fabing, with supervisor oversight....I use that term "supervise" loosely.
The inside construction crew built a sweet hydraulic trailer. Lifts up and down to ground level to run hot food carts to max security unit....towing the carts wore the wheels out.
The stuff that is made in this environment out of necessity it pretty cool and VERY durable.
The inside construction crew built a sweet hydraulic trailer. Lifts up and down to ground level to run hot food carts to max security unit....towing the carts wore the wheels out.
The stuff that is made in this environment out of necessity it pretty cool and VERY durable.
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities