Snowmachine trailer build, part 1 of 6

AKweldshop · Thu Mar 20, 2014 1:33 am

Building a trailer to haul my sled.
more pics to come, hang with me.

~John

: IMG_0750.JPG (138.92 KiB) Viewed 2136 times

: IMG_0751.JPG (110.89 KiB) Viewed 2136 times

: IMG_0752.JPG (139.76 KiB) Viewed 2136 times

AKweldshop · Thu Mar 20, 2014 1:36 am

: IMG_0753.JPG (134.42 KiB) Viewed 2134 times

: IMG_0755.JPG (112.43 KiB) Viewed 2134 times

: IMG_0756.JPG (131.25 KiB) Viewed 2134 times

AKweldshop · Thu Mar 20, 2014 1:40 am

: IMG_0758.JPG (93.96 KiB) Viewed 2133 times

: IMG_0759.JPG (128.52 KiB) Viewed 2133 times

: IMG_0757.JPG (98.17 KiB) Viewed 2133 times

More pics tomorrow.

~John

please critique and advise.

AKweldshop · Thu Mar 20, 2014 6:45 pm

More pics.

: IMG_0762.JPG (52.42 KiB) Viewed 2105 times

: IMG_0763.JPG (46.66 KiB) Viewed 2105 times

: IMG_0782.JPG (63.73 KiB) Viewed 2105 times

3/32 no-name 7018, cold and damp....
Miller Maxstar 200sd. 77amps, dig 77....

OK....

AKweldshop · Thu Mar 20, 2014 6:48 pm

: IMG_0770.JPG (130.1 KiB) Viewed 2105 times

: IMG_0779.JPG (140.36 KiB) Viewed 2105 times

: IMG_0785.JPG (143.19 KiB) Viewed 2105 times

AKweldshop · Thu Mar 20, 2014 6:52 pm

: IMG_0787.JPG (99.5 KiB) Viewed 2105 times

: IMG_0788.JPG (101.04 KiB) Viewed 2105 times

: IMG_0789.JPG (146.77 KiB) Viewed 2105 times

Where's Chucke2009 to explain whats going on???

More pics tonight....

~John

AKweldshop · Thu Mar 20, 2014 6:52 pm

Love my Evolution 180!!!

~John

NYWELDERJim · Thu Mar 20, 2014 9:46 pm

Hello John,

What kind of a snow machine will you be hauling on your trailer?

Jim

AKweldshop · Fri Mar 21, 2014 12:05 am

: IMG_0789.JPG (146.77 KiB) Viewed 2085 times

: IMG_0790.JPG (106.83 KiB) Viewed 2085 times

: IMG_0792.JPG (119.42 KiB) Viewed 2085 times

AKweldshop · Fri Mar 21, 2014 12:08 am

: IMG_0793.JPG (117.14 KiB) Viewed 2084 times

: IMG_0794.JPG (93.45 KiB) Viewed 2084 times

: IMG_0795.JPG (96.48 KiB) Viewed 2084 times

AKweldshop · Fri Mar 21, 2014 12:13 am

: IMG_0796.JPG (121.16 KiB) Viewed 1638 times

: IMG_0797.JPG (85.69 KiB) Viewed 1638 times

: IMG_0810.JPG (99.18 KiB) Viewed 1638 times

AKweldshop · Fri Mar 21, 2014 12:16 am

NYWELDERJim wrote:Hello John,

What kind of a snow machine will you be hauling on your trailer?

Jim

Jim,
Either a 98 Arctic cat ZR600efi, or a 90 Arctic Cat Cheetah Touring
For summer I'll haul my Honda 6-wheeler....
~John

The inside measurements are 6foot wide and 8foot long....

: IMG_0811.JPG (101.31 KiB) Viewed 1638 times

AKweldshop · Fri Mar 21, 2014 12:24 am

: 00404_NYu1ExcFL6_300x300.jpg (15.14 KiB) Viewed 1638 times

Rock on!!!

~John

Is there anything I'd do different you ask???

AKweldshop · Fri Mar 21, 2014 12:29 am

Gotta get a ramp/tailgate on the back as well as some lights.
Lots of fun though, And I'll only have a total of $75 in it.
~John

Superiorwelding · Fri Mar 21, 2014 10:13 pm

John,
Looking good, especially considering the $75 buy in so far.
-Jonathan

AKweldshop · Fri Mar 21, 2014 10:30 pm

I got one of those drill bits that turn into a tap, 1/4 20tpi.
25, 1/4 by 2in #3 phillips head bolts(countersunk).
Drilling into tyhe square tubing.
Epic!!!

: IMG_0823.JPG (39.98 KiB) Viewed 1629 times

: IMG_0824.JPG (31.05 KiB) Viewed 1629 times

: IMG_0825.JPG (114.38 KiB) Viewed 1629 times

~John

AKweldshop · Fri Mar 21, 2014 10:31 pm

Superiorwelding wrote:John,
Looking good, especially considering the $75 buy in so far.
-Jonathan

Gonna be more like $125, considering I've got the jack and the lights....
~John

Superiorwelding · Fri Mar 21, 2014 11:13 pm

John,
Off topic a little but where do you get your drill/tap bit? I have seen them but never had the opportunity to use one.
-Jonathan

AKweldshop · Fri Mar 21, 2014 11:21 pm

I found it at a garage sale.
I only have that one.
They are AWESOME!!!!
They drill fast, easy, and straight.
I need to buy a set.

~John

AKweldshop · Sat Mar 22, 2014 1:37 am

Superiorwelding wrote:John,
Off topic a little but where do you get your drill/tap bit? I have seen them but never had the opportunity to use one.
-Jonathan

http://www.ebay.com/itm/Combination-dri ... 20e1f49f7c

Jonathan,
Here's a eBay link.
These bits(good ones) are fairly expensive.
2cents,
~John

I'm looking for a set , little up to 1/2in, fine and course thread.
I've been searching eBay for months but no luck...
Anybody else have the drill tap bits??
Where did you buy them??

~John(again)

Fat Bob · Sat Mar 22, 2014 8:26 am

Hey John, when do we get to part 2 of 6?

Just a little razz

Even at $125 you're definitely in it for the right price.

AKweldshop · Sat Mar 22, 2014 11:52 am

Well,
I posted pics about 6 times in 6 different posts. Does that count???? Or maybe when Jody get his Mig Feeder Boom Am Done!!!!!
Auctually, the wood, I stained with waterproofing last night, should be dry, so all I have to do is head to "HF"(our equivilent).
To get some lights.

and run it inside garden hose, along the frame of the trailer.
More pix tonight.

~John

Bill Beauregard · Sat Mar 22, 2014 7:42 pm

Greenlee makes the drill taps. Use oil, avoid the rust they last a long time. 5/16-18 is less than 7 dollars.

Charles_Karl · Sat Mar 22, 2014 9:58 pm

Using a truck front end like that is a great idea John,...I like how is allows the trailer deck to be closer to the ground.

Chuck

AKweldshop · Sat Mar 22, 2014 10:44 pm

more pics, prolly done tomorrow....

: IMG_0834.JPG (93.22 KiB) Viewed 1513 times

: IMG_0838.JPG (115.01 KiB) Viewed 1513 times

: IMG_0836.JPG (130.65 KiB) Viewed 1513 times