I recently bought a lincoln promig 180 and thought of made a cart for her as my very first mig project..
What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
Like The Block wall look of the shop
drawers are a nice touch
the yellow goes well in the shop
craftsmanship great
an idea, rasie top shelf for the mig and make it center pivot to swing the mig cabling up out of way for smaller storage foot print, with a down angle when in use
drawers are a nice touch
the yellow goes well in the shop
craftsmanship great
an idea, rasie top shelf for the mig and make it center pivot to swing the mig cabling up out of way for smaller storage foot print, with a down angle when in use
Last edited by rick9345 on Thu Jun 05, 2014 7:28 am, edited 1 time in total.
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Nicely executed, and well documented - thanks for sharing! That cart isn't falling apart anytime soon.
I like your chain solution for securing the tank; only thought is how to make it adjustable to support different tank diameters as you swap refills. (Add/remove links?) I thought I had a plan until someone mentioned that wrinkle.
Cheers,
Richard
I like your chain solution for securing the tank; only thought is how to make it adjustable to support different tank diameters as you swap refills. (Add/remove links?) I thought I had a plan until someone mentioned that wrinkle.
Cheers,
Richard
Grinding discs... still my #1 consumable!
Nice cart. Well done!
I've been trying to decide on what drawers to put on my cart ... thought of these with drawer slides
http://www.mcmaster.com/#parts-bins/=sgwuke
I've been trying to decide on what drawers to put on my cart ... thought of these with drawer slides
http://www.mcmaster.com/#parts-bins/=sgwuke
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
- toni
-
New Member
-
Posts:
-
Joined:Fri Jun 13, 2014 5:06 am
-
Location:Bulgaria Sofia
-
Contact:
Hi,very nice looking cart!Very cool..!professional workmanship super.Inspired and started do, make welding table.Bugel wrote:I recently bought a lincoln promig 180 and thought of made a cart for her as my very first mig project..
- 20140607_194858.jpg (80.53 KiB) Viewed 7854 times
- 20140607_194916.jpg (63.59 KiB) Viewed 7854 times
Regards,
Toni
Last edited by toni on Tue Jun 24, 2014 8:56 am, edited 1 time in total.
Merkle TE 161 DC
Migatronic TIG 200 AC / DC PFC
Stahlwerk WIG TIG AC/DC 200 Puls mit Plasma
Migatronic TIG 200 AC / DC PFC
Stahlwerk WIG TIG AC/DC 200 Puls mit Plasma
All the way down - very nicely done. I always like to see other folks approach to things. Great work!
Thanks for the effort to get it on here. Love to see tools and equipment where there was a lot of thought put into it and in your case it is obvious. You have design skill as well as execution skill. The bottle holder is a nice touch.
Never be reluctant to put this kind of thing up.
Z
Thanks for the effort to get it on here. Love to see tools and equipment where there was a lot of thought put into it and in your case it is obvious. You have design skill as well as execution skill. The bottle holder is a nice touch.
Never be reluctant to put this kind of thing up.
Z
Mikechallgren
- Mikechallgren
-
Active Member
-
Posts:
-
Joined:Thu Jul 17, 2014 10:25 pm
-
Location:Van Nuys, California
This is really a nice project...good amount of thought and planning, as well as good workmanship. I like it a lot. The yellow color is a good contrast with the Lincoln red.
Mike the wire airplane guy http://www.wiresculptor.net
Bugel,
Very nice cart, welding table, and numerous other stands and equipment support racks. I can see you strive to pay attention to the details. Do you draw/document your designs as well? Do you have access to some CAD programs to make drawings? I can see a modification to your cart will be required to mount your new TIG welder (future purchase?). When you get your new TIG welder, don't forget to join the TIG Partaholics anonymous club (no one is immune).
Wobulate
Very nice cart, welding table, and numerous other stands and equipment support racks. I can see you strive to pay attention to the details. Do you draw/document your designs as well? Do you have access to some CAD programs to make drawings? I can see a modification to your cart will be required to mount your new TIG welder (future purchase?). When you get your new TIG welder, don't forget to join the TIG Partaholics anonymous club (no one is immune).
Wobulate
WOB
Lincoln,Precision TIG225
Miller,Millermatic 251
Miller,Spoolmatic 30A
Miller,Millermatic 130XP
Miller,Spectrum 625
Miller,Thunderbolt 225AC
KMG,Belt Grinder/2x72
Ingersoll Rand,Compressor/5HP
MSC/Vectrax,Band Saw Horizontal-Vertical/7x12
Lincoln,Precision TIG225
Miller,Millermatic 251
Miller,Spoolmatic 30A
Miller,Millermatic 130XP
Miller,Spectrum 625
Miller,Thunderbolt 225AC
KMG,Belt Grinder/2x72
Ingersoll Rand,Compressor/5HP
MSC/Vectrax,Band Saw Horizontal-Vertical/7x12
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities