I have a lamp in front of my home that either needed replaced of redone...........I decided to redo it. The lenses were ugly and yellowed. I decided to replace them with expanded metal. I am using a a halogen bulb.........we will see how the weather treats it. I also made an adjustable plant hanger out of 1 inch 304 stainless strap.
The wife's birthday is coming up and thought I would do something original using my skills and what ever I had laying around.........I did purloin the copper from work and the only cost was a rattle can of clear.
What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
In a past life I was given a job to build a custom lamp just like the one you have. It was a bid job and only for a couple hours. I don't remember how long it took me but it was at least double what they thought. Turned out very nice, was a pain to paint and we learned that it takes longer to build one of those than one thought. Chalk that one up for a learning experience.
Ok story times over, looks very nice. I have wanted to tackle a rose for some time, I guess there is no time like the present.
-Jonathan
Ok story times over, looks very nice. I have wanted to tackle a rose for some time, I guess there is no time like the present.
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
countryboy83
- countryboy83
-
New Member
-
Posts:
-
Joined:Sun Jun 15, 2014 4:07 pm
-
Location:Live in central part of Louisiana - Work Offshore in the Gulf of Mexico
those roses are amazing!! could you give a little bot of insight on how you went about making these?
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
The roses are awesome! I made one for my future wife, she loved it, but I think yours turned out better than mine. My stem was too big of a diameter, but it was all I had lying around. I used 1/4 pipe for a stem, should have went out and bought 1/8th.
countryboy
they are pretty easy to make, if you type in making copper roses on youtube, there are a few videos that show you how. It's hard to explain without the visuals.
Other Steve
countryboy
they are pretty easy to make, if you type in making copper roses on youtube, there are a few videos that show you how. It's hard to explain without the visuals.
Other Steve
- Attachments
-
- 1600.jpg (42.59 KiB) Viewed 1473 times
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
rahtreelimbs
- rahtreelimbs
-
Heavy Hitter
-
Posts:
-
Joined:Mon Jun 14, 2010 10:39 pm
countryboy83 wrote:those roses are amazing!! could you give a little bot of insight on how you went about making these?
I printed out a stencil off the web. Just Google "COPPER ROSE." You get instructions as well.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Rich, I might have to try that.
I saw (finally) that I missed a couple calls from you again. I think this is a conspiracy from my cell phone provider... I only seem have issues receiving messages and calls when I'm eligible for an "upgrade" and contract renewal...
Anyone else get that feeling?
Steve S
I saw (finally) that I missed a couple calls from you again. I think this is a conspiracy from my cell phone provider... I only seem have issues receiving messages and calls when I'm eligible for an "upgrade" and contract renewal...
Anyone else get that feeling?
Steve S
Tassie Dave
- Tassie Dave
-
Active Member
-
Posts:
-
Joined:Wed Sep 03, 2014 2:04 am
-
Location:Tasmania
Hi Steve S
I live in the land down under mate ( Tasmania) and get it as well. Sometimes it says i have messages in my voicemail and i never even heard the bloody phone ring, i might add it was quiet at the time . Bloody telco's ripping you off.
I live in the land down under mate ( Tasmania) and get it as well. Sometimes it says i have messages in my voicemail and i never even heard the bloody phone ring, i might add it was quiet at the time . Bloody telco's ripping you off.
I have an
Esab LHQ 150
Pro Weld TC256 ACDC multi process Tig Cut MMA
WeldSmart Mig 200IGBT Mig Tig MMA and spool gun
Esab LHQ 150
Pro Weld TC256 ACDC multi process Tig Cut MMA
WeldSmart Mig 200IGBT Mig Tig MMA and spool gun
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities