What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
3 pt hitch log skidding hitch
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

My father in law and I have been selling poplar post to make a little extra spending cash and pay for the new tractor, plus we needed to clear off some new pasture anyway. He saw a log skidding hitch on Northern Tool and loved it so I decided to build one. We have a lot of scrap laying around the only thing we had to buy were the hitch pins. The hook was off an old ratchet binder that is seized up so I cut it off and welded it. I am posting a link to Northern Tools hitch to compare. http://www.northerntool.com/shop/tools/ ... _200335943
Attachments
DSCN0859.JPG
DSCN0859.JPG (52.2 KiB) Viewed 927 times
DSCN0858.JPG
DSCN0858.JPG (57.07 KiB) Viewed 927 times
DSCN0857.JPG
DSCN0857.JPG (65.74 KiB) Viewed 927 times
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

Got it all painted up, now to scratch it up. :D
Attachments
DSCN0860.JPG
DSCN0860.JPG (88.98 KiB) Viewed 926 times
DSCN0861.JPG
DSCN0861.JPG (89.61 KiB) Viewed 926 times
DSCN0862.JPG
DSCN0862.JPG (86.98 KiB) Viewed 926 times
DSCN0863.JPG
DSCN0863.JPG (75.37 KiB) Viewed 926 times
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

And more
Attachments
DSCN0865.JPG
DSCN0865.JPG (70.1 KiB) Viewed 926 times
DSCN0864.JPG
DSCN0864.JPG (39.55 KiB) Viewed 926 times
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Looks good Matt. Sad that it will get all scratched up though. Oh well, that's life I guess.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I know but the paint job wasn't that great anyway, just a barrier to keep it from rusting out. It is heavy built though. I put about 3 lb of 7018 rods into this build. I put three passes on each joint just to make sure it won't break. :D
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Those are your welds??
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

Yes they are, I do all my own tricks :lol:
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

The C channel did not have a good fit up. I got sloppy and just rushed it out because I am already swamped with orders and since it was for myself I rushed it and slopped it because if it ever breaks it's mine I can fix it. I know it is better to do it right to start with but I am swamped so I thought I would gain time on my personal project and take time on others. I had about a 1/4" gap on the c channel so it is a little sloppy. i welded it with mig just because of the gap and wanting to get it done. the tubing and the hitch components are 7018 but the c channel is mig.
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

mcoe wrote:The C channel did not have a good fit up. I got sloppy and just rushed it out because I am already swamped with orders and since it was for myself I rushed it and slopped it because if it ever breaks it's mine I can fix it. I know it is better to do it right to start with but I am swamped so I thought I would gain time on my personal project and take time on others. I had about a 1/4" gap on the c channel so it is a little sloppy. i welded it with mig just because of the gap and wanting to get it done. the tubing and the hitch components are 7018 but the c channel is mig.
Yes please take your time on my fire pit :lol: :lol: It is a down and dirty farm fab, no need for a blue ribbon.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

Oh trust me, we are going super slow on it. :D
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”