[AKweldshop]

Thought you guys might like this thread.....

Feel free to ask any questions.

~John

The truck came to me as a cab and chassis.
The customer is buying ALL supplies....

IMG_7509.JPG (91.52 KiB) Viewed 9153 times

IMG_7512.JPG (55.47 KiB) Viewed 9153 times

IMG_7519.JPG (65.8 KiB) Viewed 9153 times

[AKweldshop]

Time to order metal....
And its here, time to start cutting it up.
3 side plates on each side, 1/2"x 6" flat bar...

IMG_7539.JPG (48.56 KiB) Viewed 9151 times

IMG_7541.JPG (110.78 KiB) Viewed 9151 times

IMG_7552.JPG (79.99 KiB) Viewed 9151 times

[AKweldshop]

I didn't drill any holes in the frame, I used all existing holes.

IMG_7558.JPG (109.16 KiB) Viewed 9149 times

IMG_7582.JPG (62.97 KiB) Viewed 9149 times

IMG_7590.JPG (67.92 KiB) Viewed 9149 times

[AKweldshop]

IMG_7591.JPG (111.28 KiB) Viewed 9148 times

IMG_7603.JPG (83.19 KiB) Viewed 9148 times

IMG_7611.JPG (84.94 KiB) Viewed 9148 times

[AKweldshop]

IMG_7618.JPG (70.7 KiB) Viewed 9146 times

IMG_7623.JPG (94.78 KiB) Viewed 9146 times

IMG_7624.JPG (98.09 KiB) Viewed 9146 times

[AKweldshop]

IMG_7632.JPG (96.24 KiB) Viewed 9145 times

IMG_7654.JPG (90.87 KiB) Viewed 9145 times

IMG_7656.JPG (60.16 KiB) Viewed 9145 times

[AKweldshop]

IMG_7659.JPG (68.67 KiB) Viewed 9144 times

IMG_7663.JPG (65 KiB) Viewed 9144 times

[AKweldshop]

IMG_7667.JPG (83.69 KiB) Viewed 9143 times

IMG_7675.JPG (40.92 KiB) Viewed 9143 times

IMG_7733.JPG (66.95 KiB) Viewed 9143 times

[AKweldshop]

IMG_7742.JPG (59.75 KiB) Viewed 9142 times

IMG_7746.JPG (71.9 KiB) Viewed 9142 times

IMG_7752.JPG (71.26 KiB) Viewed 9142 times

[AKweldshop]

To be continued at a better time.

~John

[Superiorwelding]

John,
I really like your build. To clue everyone in, I have already been following John's build and helping where I can on it. I like the fact that John is building this bed from scratch, no prints at all. In my opinion that shows some skill and forethought. Can't wait to see the finished product!
-Jonathan

[Wes917]

Looks good so far, only thing I don't like is the bolts through the frame. Are those going to stay. If so they should be a little longer. Or maybe it's the pictures?

[AKweldshop]

Looks good so far, only thing I don't like is the bolts through the frame. Are those going to stay. If so they should be a little longer. Or maybe it's the pictures?

They are just started in the nuts.
Just fitting them for now.

They do have 1/2" to 3/4" past a full nut.

Grade 8

[AKweldshop]

I got the 3" channel cut into 95" pieces...

IMG_7801.JPG (95.34 KiB) Viewed 7968 times

IMG_7802.JPG (56.17 KiB) Viewed 7968 times

IMG_7803.JPG (82.92 KiB) Viewed 7968 times

[AKweldshop]

IMG_7806.JPG (88.41 KiB) Viewed 7967 times

IMG_7822.JPG (73.92 KiB) Viewed 7967 times

IMG_7835.JPG (80.74 KiB) Viewed 7967 times

[AKweldshop]

IMG_7851.JPG (48.78 KiB) Viewed 7967 times

IMG_7864.JPG (77.5 KiB) Viewed 7967 times

IMG_7869.JPG (46.83 KiB) Viewed 7967 times

[AKweldshop]

IMG_7883.JPG (90.24 KiB) Viewed 7967 times

IMG_7885.JPG (83.73 KiB) Viewed 7967 times

IMG_7889.JPG (81.88 KiB) Viewed 7967 times

[AKweldshop]

IMG_7897.JPG (94.65 KiB) Viewed 7967 times

IMG_7901.JPG (71.03 KiB) Viewed 7967 times

IMG_7905.JPG (54.29 KiB) Viewed 7967 times

[AKweldshop]

IMG_7919.JPG (69.13 KiB) Viewed 7967 times

IMG_7941.JPG (87.79 KiB) Viewed 7967 times

IMG_7975.JPG (84.07 KiB) Viewed 7967 times

[AKweldshop]

IMG_7997.JPG (76.34 KiB) Viewed 7967 times

IMG_8001.JPG (36.53 KiB) Viewed 7967 times

IMG_8012.JPG (81.09 KiB) Viewed 7967 times

[AKweldshop]

To be continued at a later date.

~John

IMG_8076.JPG (63.81 KiB) Viewed 8087 times

IMG_8077.JPG (92.78 KiB) Viewed 8087 times

[AKweldshop]

IMG_8098.JPG (50.95 KiB) Viewed 8080 times

IMG_8102.JPG (74.13 KiB) Viewed 8080 times

IMG_8103.JPG (42.31 KiB) Viewed 8080 times

[AKweldshop]

IMG_8110.JPG (50.68 KiB) Viewed 8081 times

IMG_8117.JPG (68.19 KiB) Viewed 8081 times

IMG_8143.JPG (89.66 KiB) Viewed 8081 times

[AKweldshop]

IMG_8256.JPG (76.42 KiB) Viewed 8080 times

IMG_8306.JPG (50.31 KiB) Viewed 8080 times

IMG_8319.JPG (96.19 KiB) Viewed 8080 times

[AKweldshop]

IMG_8322.JPG (46.83 KiB) Viewed 8081 times

IMG_8388.JPG (55.15 KiB) Viewed 8081 times

IMG_8447.JPG (72.05 KiB) Viewed 8081 times