[Retroweld]

Hey guys. I wanted to share a video of my welding table I built a couple of years ago. I just uploaded a video of it on YouTube. Before I built it I searched all of the various forums, google, youtube, etc. and anything else I could find when I was trying to figure out how I should build my welding table. I wanted to share this with anyone who might be doing the same thing now and/or is looking for ideas to make changes to their current table.

YOUTUBE VIDEO - My domain http://www.retroweld.com will take you to my youtube channel. I gained a bunch of good ideas from you guys back then so I wanted to share it with you in hopes someone will benefit from it.

Hope it helps. Thanks everyone.

Douglas.

[Retroweld]

Guys, this thread is to help everyone and to give people good ideas if they are building or plan to build a welding table. Feel free to share pictures of your welding table here if you like. Thanks.

[Otto Nobedder]

Thanks, Retroweld,

There are probably more cart ideas here then tables, but if you search this section, you'll find some awesome tables with, in some cases, more than a hundred hours of work.

For example:
http://forum.weldingtipsandtricks.com/v ... f=9&t=6850

We'll look at any idea. And probably turn it in it's head.

Welcome to our community!

Steve S

[Retroweld]

Thanks, Retroweld,

There are probably more cart ideas here then tables, but if you search this section, you'll find some awesome tables with, in some cases, more than a hundred hours of work.

For example:
http://forum.weldingtipsandtricks.com/v ... f=9&t=6850

We'll look at any idea. And probably turn it in it's head.

Welcome to our community!

Steve S

Thanks. That is a really nice table. I wish mine had holes on top like that. I'm always needing to clamp something.