General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Man Cave / Money Pit
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

The garage was full and I need some space for my projects. :roll:
So...
I bought three commercial lots and 5000 square feet of derelict building.
The roof leaks, it has a dirt floor, one wall is missing and it's full of stuff.
I've got my work cut out for me, but with any luck, it will serve its purpose.
Attachments
Looking East from inside.jpg
Looking East from inside.jpg (73.42 KiB) Viewed 2762 times
West side.jpg
West side.jpg (82.9 KiB) Viewed 2762 times
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 06, 2014 12:48 am
  • Location:
    Melbourne, Australia

I have no doubt whatever needs doing will get done. What a fantastic cave. Wow. You could get lost in there for a long time...
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

bring on the dumpsters!
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

What are you like at layin concrete?
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

My 20,000 lb tractor would kill a concrete floor.
Coldman wrote:What are you like at layin concrete?
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 06, 2014 12:48 am
  • Location:
    Melbourne, Australia

More Concrete...
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
Top
User avatar
  • Posts:
  • Joined:
    Sun Feb 17, 2013 1:30 pm
  • Location:
    Colorado

WerkSpace wrote:My 20,000 lb tractor would kill a concrete floor.
Coldman wrote:What are you like at layin concrete?
Re-bar, lots of it! lol
Go break something, then you can weld it back the right way.

Image
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Fat Bob wrote:
WerkSpace wrote:My 20,000 lb tractor would kill a concrete floor.
Coldman wrote:What are you like at layin concrete?
Re-bar, lots of it! lol
LOL!
Steel floor, with concrete finish...
Top
Boomer63
  • Posts:
  • Joined:
    Fri Sep 12, 2014 11:52 am
  • Location:
    Indiana near Chicago

You can NEVER have too much shop space!
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

I've decided that climbing up and down ladders to get on to the roof for maintenance sucks.
So, I've decided to make a set of stairs to get up there, from inside the building. ;)
I looked into the cost of roof hatches and they are pricey. $3000 +

I'm going to re-purpose a deep freezer in order to fabricate my new roof hatch.
The idea is to cut it and make some flaps that can be screwed to the roof.
The door lid even has a light inside, so that I can see where I'm going.

https://www.youtube.com/watch?t=59&v=BbhNiUC0OQg
Attachments
deep freezer.jpg
deep freezer.jpg (35.53 KiB) Viewed 2543 times
Top
Boomer63
  • Posts:
  • Joined:
    Fri Sep 12, 2014 11:52 am
  • Location:
    Indiana near Chicago

@Werkspace - Love to see the final result with that hatch project!
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

I bought a 4X4 diesel loader for $1500 for my Man Cave.
http://www.antiquefarming.com/PDF/caseloader.pdf
Moving things around just got easier.
Attachments
My Case W9B.jpg
My Case W9B.jpg (89.65 KiB) Viewed 1673 times
CASE W9 Loader.gif
CASE W9 Loader.gif (84.79 KiB) Viewed 1712 times
Last edited by WerkSpace on Thu Jul 09, 2015 1:23 am, edited 2 times in total.
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Wow. You wouldn't want to miss the door. :)
It would be worse than emus kickin your dunny down. :lol:
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

It's hard to get much information on these 1960's 4X4 machines.
The PDF that I have is for the four cylinder and mine is a six cylinder.
If I ever decide to knock down this building, I have the machine for the job.
It has 40,000 lbs of pushing/pulling power. plus 6,000 lbs of lift capability.
Coldman wrote:Wow. You wouldn't want to miss the door. :)
It would be worse than emus kickin your dunny down. :lol:
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

I have a mate that trades and repairs these old timers. If you let me know the make and model I will ask if he has a manual for it.
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

Thanks for the offer, but I found a service manual on eBay.
In the meantime, this loader needs a bath and some paint.
Coldman wrote:I have a mate that trades and repairs these old timers. If you let me know the make and model I will ask if he has a manual for it.
Attachments
My Case W9B 2.jpg
My Case W9B 2.jpg (86.07 KiB) Viewed 1669 times
Top
Bill Beauregard
  • Posts:
  • Joined:
    Thu Jan 24, 2013 9:32 pm
  • Location:
    Green Mountains of Vermont

My Case backhoe is newer, but still old. My choices are Beauregard Equipment in Colchester VT, (no relation I know of), or Town Line in Plainfield NH, (closer). They get everything I can ask for, even a service, parts, and operators manual.
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

Thanks Bill. I bought the service manual yesterday and the operator's manual today. Ebay is a very cool way to shop.
Bill Beauregard wrote:My Case backhoe is newer, but still old. My choices are Beauregard Equipment in Colchester VT, (no relation I know of), or Town Line in Plainfield NH, (closer). They get everything I can ask for, even a service, parts, and operators manual.
Top
nathan
  • Posts:
  • Joined:
    Sun Jun 16, 2013 1:20 pm
  • Location:
    Texas

:o

Words cannot express my jealousy.
Instagram: @nathanppiatt

Owner/welder at Homegrown Metal Fab

Lincoln Weld-Pak 125 HD
Lincoln AC/DC 225/125
Lincoln Port-a-torch
30" 40 ton homegrown press brake
Northern Industrial1HP 3/4" chuck, 16 speed drill press
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

I picked up a pair of 14' steel sliding doors for my man cave yesterday.
The price was $125 each. Definitely better than the cost of materials.

On Thursday, I'm off to see a bucket for the loader.
My plans are slowly coming together. Evolution...
Attachments
Steel Sliding Doors.JPG
Steel Sliding Doors.JPG (69.34 KiB) Viewed 1575 times
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

nathan wrote::o

Words cannot express my jealousy.
Same here....
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

The JD755B bucket arrived today. 2.25 cubic yards. It weighs 2300lbs.
The loader can lift 6000lbs. so I'm still in the usable range.
Dimensions are 87"W X 50"H X 48"Deep

The bucket pin centers are identical to my loader.
It shouldn't take too much modification to match everything up.
I've decided to leave the bucket size as is. It's not as big as I first thought.

A bit of lathe work to make insert spacers for the bottom pins.
and some welding and fabrication to make up the top pin mounts.
Attachments
Bucket 1.jpg
Bucket 1.jpg (82.79 KiB) Viewed 1522 times
Bucket 2.jpg
Bucket 2.jpg (102.4 KiB) Viewed 1522 times
Bucket 3.jpg
Bucket 3.jpg (103.84 KiB) Viewed 1522 times
Last edited by WerkSpace on Thu Aug 13, 2015 6:22 pm, edited 1 time in total.
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

That would be pretty slick and resourceful!
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
Bill Beauregard
  • Posts:
  • Joined:
    Thu Jan 24, 2013 9:32 pm
  • Location:
    Green Mountains of Vermont

Leave the ribs tall. You can create open hooks, and add hanging forks, very handy. The forks you have will never get used without a quick attach. Convert them to hook, and you can drive up to scoop them off the ground.
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

I've edited the bucket pics.
With a few modifications, it should fit fine.
It's actually really close to the size that I was looking for.
Top
Post Reply

Return to “Welding Forum General Shop Talk”