[toolnuts]

Hi All,

A newbie here. I'm trying to learn how to weld solid high speed bandsaw blades, has anyone
figured a good method for doing this?

I have a Lincoln Ivertec 205T, an inverter based pulser tig/stick machine.

I'm using the smallest 2% thoriated trode I have, running 60A background, 30A foreground, and
2.5 pulses/sec. The foreground is running at 30%.

I am using a fixture with a copper backing plate.

I found it very easy to burn a hole or a divot in the back of the blade.

I'm running 20CFM Argon.

I'm thinking of adding a backing plate to the back of the blade to try to stop the
divot/hole problem.

I would love to hear someone who has a good answer to welding these blades.

Note these are not Bi-metal blades, but solid high speed steel.

Best Regards,

Paul Hoffman

[big gear head]

I have a fixture that I built from aluminum with De-Sta-Co clamps on it to hold the blade when I weld it. I strike an arc on the blade and put the wire under the arc. I melt a ball off of the wire and let it melt into the blade. It's sort of like lay wire.

[Arno]

No direct info on TIG welding (this is resistance-welding), but perhaps it gives some background including hardening and (re-)annealing the weld and the likes for the blades here:

https://www.youtube.com/watch?v=GBwr3oPJHcs

Bye, Arno.

[LtBadd]

No direct info on TIG welding (this is resistance-welding), but perhaps it gives some background including hardening and (re-)annealing the weld and the likes for the blades here:

https://www.youtube.com/watch?v=GBwr3oPJHcs

Bye, Arno.

I like this guy, he is funny and has many good videos if you're interested in machining and print reading