Stick Welding Tips, Certification tests, machines, projects
Open root butt weld with 7018
Post Reply
martinr
  • Posts:
  • Joined:
    Thu Dec 23, 2010 3:45 pm
  • Location:
    Manchester, UK

I have 2 test pieces left to do on my MMA course in the UK: open root butt welds in both the flat and the vertical position (mild steel). I'll be using a 3/32" low-hydrogen E7018 rod, and I'd appreciate any advice. I know not to whip a 7018 rod, only to manipulate it in the pool. I'd appreciate suggestions as to the best gap and root face dimensions for both positions (which I assume would be the same for both) and any advice on control of the keyhole etc.

Many thanks and a happy Xmas

Martin
Top
kermdawg
  • Posts:
  • Joined:
    Tue May 25, 2010 8:16 pm
  • Location:
    All over, mostly southwest USA

sry for the late reply-

Need more info on your test. Plate or pipe?(I'd assume plate) What thickness plate?
Signature? Who needs a F***ing signature?
Top
martinr
  • Posts:
  • Joined:
    Thu Dec 23, 2010 3:45 pm
  • Location:
    Manchester, UK

kermdawg wrote:sry for the late reply-

Need more info on your test. Plate or pipe?(I'd assume plate) What thickness plate?
Thanks and sorry, I should have said: it's 6mm plate.

Martin
Top
kermdawg
  • Posts:
  • Joined:
    Tue May 25, 2010 8:16 pm
  • Location:
    All over, mostly southwest USA

Just to make sure my calculations are right-6mm is approx 1/4 inch right?
Signature? Who needs a F***ing signature?
Top
Post Reply

Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”