What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
YukWelder
  • Posts:
  • Joined:
    Wed May 11, 2016 5:42 am
  • Location:
    Pacific Northwest, foothills of the Cascades

Made a cart that will hold mig, tig, and plasma on four wheels.
Attachments
Welding Cart
Welding Cart
20160525_135128.jpg (29.51 KiB) Viewed 1112 times
  • Posts:
  • Joined:
    Sun May 01, 2016 7:46 am
  • Location:
    Fort Myers Florida

Nicely capped tubes etc. Damn nice job.
AWS D1.1 / ASME IX / CWB / API / EWI / RWMA / BSEE
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
YukWelder
  • Posts:
  • Joined:
    Wed May 11, 2016 5:42 am
  • Location:
    Pacific Northwest, foothills of the Cascades

The top shelf is angled at 100 degrees for easy reading of front panels. There are no front corner posts for easy access to lower shelves. There are six 1 1/2 x 4 side hooks for leads and electric lines. The filler rod side shelf is 1 1/2 x 10" long. And the tank shelve is large enough to hold 240 bottles. This unit fits through a 32 " door.

Got lucky on the diamond plate, in salvage pile was a full sheet of 14 gauge 4 x 10 with one end ran over by a fork lift. $50...Score!
Post Reply