Hi greetings from NZ ,we are a community Group
that has acquired a small budget Arc welder, and a Mig gasless welder.
have run a few practise beads and that's it
hoping to make metal sheet steel letter boxes (Rural Mail Boxes and ARt craft items )for fund raising;
Kev Wildey Timaru NZ TIMARU MEN'S SHED
will post pic of our gear, and hopefully obtain some good advice and knowledge ,cheers and thanks in advance ;Kev
Welcome to the community! Tell us about yourself, your welding interests, skills, specialties, equipment, etc.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Welcome, Kev,
You've picked a good spot. There's tons of great information to be had here, free of charge and fee of drama.
There are people here at every experience level, and form almost any field you can imagine from metal artist to aerospace welder, and everything in between. All with the goal of helping each other learn something new.
Steve S
You've picked a good spot. There's tons of great information to be had here, free of charge and fee of drama.
There are people here at every experience level, and form almost any field you can imagine from metal artist to aerospace welder, and everything in between. All with the goal of helping each other learn something new.
Steve S
- Metal_pig2001
-
Active Member
-
Posts:
-
Joined:Sat Aug 16, 2014 3:21 am
-
Location:Rotorua, New Zealand
And Hi from Rotorua
I am sure that you will find lent you help here on the forum.
Regards
Ralph
I am sure that you will find lent you help here on the forum.
Regards
Ralph
- DLewis0289
-
Ace
-
Posts:
-
Joined:Sun May 01, 2016 7:46 am
-
Location:Fort Myers Florida
Welcome aboard!
AWS D1.1 / ASME IX / CWB / API / EWI / RWMA / BSEE
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
- Metal_pig2001
-
Active Member
-
Posts:
-
Joined:Sat Aug 16, 2014 3:21 am
-
Location:Rotorua, New Zealand
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
No chups? Shut, thet's a but rough!Metal_pig2001 wrote:Otherwise we Kiwis won't share our chups with you
Regards
Ralph
Sorry for threadjack...I saw 'Search for the Wilderpeople' on the weekend and now my whole family is constantly using (badly done) Kiwi accents!
Kym
Welcome to the forum!
You Kiwi's must be really tired of us ozzies unfurling the same old worn out ribbing we give you at every available opportunity.
I don't know what's wrong with us why we do it. It must be in our dna or something. Even now I find myself suppressing the urge to indulge. And you guys are just about always good natured about it.
Well done, and let's get welding!
You Kiwi's must be really tired of us ozzies unfurling the same old worn out ribbing we give you at every available opportunity.
I don't know what's wrong with us why we do it. It must be in our dna or something. Even now I find myself suppressing the urge to indulge. And you guys are just about always good natured about it.
Well done, and let's get welding!
Flat out like a lizard drinkin'
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
+1.Coldman wrote:Welcome to the forum!
You Kiwi's must be really tired of us ozzies unfurling the same old worn out ribbing we give you at every available opportunity.
I don't know what's wrong with us why we do it. It must be in our dna or something. Even now I find myself suppressing the urge to indulge. And you guys are just about always good natured about it.
Well done, and let's get welding!
And so many Kiwis are heroes of mine. Burt Munro, Bruce Anstey and especially Jon Britten. Genuine legends.
Kym
Return to “Member Introductions”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities